Signal panel words
DANGER indicates a hazardous situation, which if not avoided, will
result in death or serious injury.
NOTICE indicates a non-hazardous situation, which if not avoided,
could result in property damage.
Lockout/Tagout
The lockout/tagout procedure protects personnel from injuries caused by the unexpected
energizing or startup of the ADS or the release of stored energy during service or
maintenance.
Do the lockout/tagout procedure before doing service or maintenance procedures.
WARNING! Failure to do the lockout/tagout procedure can result in
equipment damage or injury to personnel.
1. Stop the ADS by turning off the power switch, and then lock and
tag the power
switch.
2. Turn off the air supply to the ADS, and then lock and tag the air source.
© 2016–2017 Flow International Corporation
To Next Page
Loading...