Flow Paser CF900 - Specifications

Specifications
Dimensions (Length¯Width¯Height) ................ 858¯858¯1392 mm (33.8¯33.8¯54.8 in.)
Weight ............................................................................................................... 112 kg (247 lb) empty
................................................................................................................................ 537 kg (1184 lb) full
Abrasive capacity ........................................................................................................ 425 kg (937 lb)
Customer air supply ......................................................................... has lockout/tagout capability
Customer air supply line ........................................................................................ >20 mm (3/4 in.)
Operating pressure/volume ............................................ 5.5 bar (80 psi) @ 566 lpm (20 scfm)
1
S
urge pressure/volume ....................................5.5–6.5 bar (80–94 psi) @ 2250 lpm (80 scfm)
Maximum compressed air volume .................. dependent on abrasive material and flow rate
Quality of compressed air ........................................................................ FT[CPFHKNVGTGFVQO
Supply voltage ....................................................................... 100–240 VAC, 50/60 Hz, or 24VDC
2
AC
Frequency ......................................................................................................................... 50/60 Hz
Full-Load current ................................................................................................... 0.20 A@ 240 VAC
.................................................................................................................................. 0.48 A @ 100 VAC
....................................................................................................................................... 2.0 A @ 24 VDC
Largest-load current..................................................................................................................... 2.0 A
Rating (SCCR) ..............................................................................................................................2.5 kA
Site.................................................................................................................................. Level and solid
Operating environment temperature ..................................................... 0°C–55°C (32°F–131°F)
Operating environment relative humidity .......................................................................... 5%–95%
Operating environment elevation ................................. 0–2500 m (0–8200 ft) above sea level
Service clearance ................................................................................ 1 m (3 ft) on front and sides
1
Requires a minimum of 2 bar (30 psi) difference between the supply pressure and the operating pressure.
© 2016–2017 Flow International Corporation
Page 6 of 31