Self-erecting portable greenhouses Take Down Instructions
Page 1
Step 1: Begin first by
removing all of the stakes. It
may be easier for you to use
one take to remove another.
Step 2: Be sure your doors and screens are
zipped closed, then place your PlantHouse™
on it's side and remove the fiber pole from the
ceiling.
Step 3: Push on the center
steel band. The two top bands
must be forced to lay
uniformly on top of the two
bottom bands so your
PlantHouse™ will fold into two
panels.
Step 4: Folding one panel on top of the
other panel your PlantHouse™ should be
one flat panel. Shown in Photos 4 & 5.
Step 5: Choosing the top corner, fold your
PlantHouse™ in half. You will feel the tension
of the spring steel. Continue folding under
while you bring the left side up and
over. Your PlantHouse™ should resemble a
taco. See photos 6 & 7.
Step 6: Continue
folding your
PlantHouse™.
To Next Page
Loading...