Floyd Rose Tremolo - User Manual

Original Floyd Rose Tremolo
Diagram
There are many bridges made under Floyd Rose patents. Unfortunately, their physical dimensions are not
uniform. We only offer routing for the original Floyd Rose tremolo and for the Schaller Floyd Rose tremolo,
both of which we sell.
This bridge features hardened steel throughout, a removable tremolo arm and original saddles for plain-
end string anchoring. This bridge has a string spread of 2-3/32" (53mm).
There are several stud options available. If you supply us with your studs or buy the bridge from us, we
will install them for just $10.00. Wood screws are still provided by some vendors. Warmoth only provides
the stud/insert mounting system with this bridge.

Summary

Original Floyd Rose Tremolo Diagram and Features

Bridge Dimensions and String Spread

Detailed diagram and measurements of the Original Floyd Rose tremolo bridge, including its string spread.

Mounting Stud Options

Comparison of old wood screw and new stud insert mounting systems for the tremolo bridge.

Floyd Rose Installation Routing Methods

Non-Recessed Installation

Details for standard non-recessed Floyd Rose installation, requiring neck pocket angling or shimming.

Recessed Installation

Explanation of recessed routing, allowing the bridge to sit lower into the body for improved action.

Floyd Rose Pro Routing Dimensions

Bottom Route Dimensions

Technical millimeter measurements for the bottom routing of the Floyd Rose Pro tremolo system.

Side Profile Dimensions

Millimeter dimensions illustrating the side profile and depth aspects of the Floyd Rose Pro routing.

Top Route Dimensions

Technical millimeter measurements for the top routing of the Floyd Rose Pro tremolo system.

Floyd Rose Tremolo Specifications

General

Material	Steel
Mounting	Recessed or Surface Mount
Arm	Threaded or Push-in
Saddle Material	Steel
Tremolo Block Material	Steel
Finish	Chrome
String Locking	Yes
Fine Tuners	Yes
Compatibility	Electric Guitars