FLTR TMP102EC - Turn Sound On;Off; Set Threshold for Elevated Temperature Alert

Turn Sound On/O
The TMP102EC uses a buzzer to “beep” for various functions. To turn o
sound, ensure the thermometer is o. Then, hold the Measurement
Trigger for 9 seconds until you see the symbol appear on the digital
display then release the trigger. Press the Measurement Trigger again to
selected between ON and OFF. Aer your selection, hold the trigger for 5
seconds to save the setting and turn the thermometer o.
Set Threshold for Elevated Temperature Alert
(Orange Indicator)
This thermometer has 99.5°F (37.5°C) preset as the threshold to indicate
an elevated temperature. However, this is only a reference value. At this
temperature, dierent people feel dierent, with some feeling
uncomfortable and others feeling fine. If you wish to change the
elevated temperature threshold aer consulting with your doctor, you
can manually adjust it to suit your preference.
With the thermometer o, hold the Measurement Trigger for 12 seconds
until you see the Orange Temperature Indicator on the digital
display, then release the trigger.
Press the trigger again to increase the threshold by .02°F (0.1°C). Press
again and again as needed. The adjustment range is from 99.5 – 100.2°F
(37.5 – 37.9°C). Once you reach maximum threshold temperature, press
the trigger again and it will return to the minimum value and the cycle
will repeat.
Aer adjustment is complete, press the trigger for 5 seconds to save the
setting and turn the thermometer o.
- 11 -