FLTR PC828 - User Manual

Questions and Answers

C
Cody SimmonsAug 10, 2025
What to do if FLTR PC828 does not power on?
- K
  karengibsonAug 10, 2025
  If your FLTR Thermometer isn't turning on, the issue might be related to the batteries. First, try replacing the batteries, as the current battery level may be too low. If that doesn't work, double-check that the batteries are inserted correctly, paying attention to the polarities. If the thermometer still fails to power on after these steps, it may be damaged, and you should contact the manufacturer.
S
stacyaguilarAug 19, 2025
Why FLTR PC828 reading is too high?
- B
  Brandon DonovanAug 19, 2025
  If your FLTR Thermometer displays a reading that is too high, several factors could be the cause. First, if you've recently been in a hot environment, allow your body to adjust to a room temperature between 50.0 - 104.0°F (10.0 - 40.0°C) for at least 30 minutes before measuring your temperature. Also, exposure to hot air from heaters, air conditioners, or fireplaces can affect the reading; move away from these sources for 30 minutes before taking a measurement. Finally, low batteries can cause inaccurate readings, so try replacing the batteries.
G
George MartinezAug 30, 2025
Why FLTR PC828 Thermometer reading is too low?
- L
  Laura SmithAug 30, 2025
  If your FLTR Thermometer displays a reading that is too low, there might be a few reasons. Ensure the Infrared Temperature Sensor is clean, following the cleaning instructions. Maintain a distance of 1.2 - 2.0 inches (3 - 5cm) between the Infrared Temperature Sensor and the target. If you've just come from a cold environment, allow yourself to acclimate to a room temperature between 50.0 - 104.0°F (10.0 - 40.0°C) for at least 30 minutes before taking a temperature measurement.