EasyManua.ls Logo

FLTR PC828 - Take a Room Temperature

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Warnings and Precautions
1. Not for use on children under 2 years of age.
2. Keep out of reach of children under 12 years of age.
3. Never immerse the thermometer in water or other liquid (it is not
waterproof). For cleaning and disinfection, please follow the
instructions in the “Cleaning and Disinfection” section of these use
instructions.
4. Never use the thermometer for purposes other than its intended use.
Please follow the general safety precautions when using the
thermometer on children.
5. Keep the thermometer out of direct sunlight in a dry, dust-free,
well-ventilated area at a temperature between 50.0 – 104.0°F (10.0 –
40.0°C). Do not use the thermometer in a high humidity environment
(> 85% RH).
6. Do not use the thermometer if there are signs of damage on the
Infrared Temperature Sensor or elsewhere on the instrument! Please
contact the manufacturer.
7. This thermometer consists of high precision parts. Do not drop or
twist the instrument. Protect it from severe impact and shock.
8. Please consult your doctor if you see such symptoms as unexplained
irritability, vomiting, diarrhea, dehydration, changes in appetite or
activity, seizure, muscle pain, shivering, sti neck, pain when
urinating, etc., even in the absence of fever.
9. Those who exhibit a normal temperature may still need to receive
medical attention. When determining the severity of illness of people
on antibiotics, analgesics or antipyretics, temperature reading should
not solely be relied upon.
10. Temperature elevation may signal a serious illness, especially in
adults who are elderly, frail, or have a weakened immune system, or
neonates and infants. Please seek professional advice immediately
when there is a temperature elevation in a person who meets any of
the following criteria:
• Over 60 years of age (fever may be dulled or even absent in
elderly patients).
• Diagnosed with diabetes mellitus or a weakened immune
system (e.g. HIV positive, cancer, chemotherapy, chronic
steroid treatment, splenectomy).
• Bedridden (e.g. nursing home patient, stroke, chronic illness).
• A transplant patient (e.g. liver, heart, lung, kidney).
11. This thermometer is not intended for use on children under 2 years
of age. It is not intended to measure hypothermic temperatures.
Do not allow children to take their temperature unattended.
12. Use of this thermometer is not intended as a substitute for
consultation with your physician or pediatrician. It is for household
use only.
13. Do not use the thermometer for continuous temperature monitoring
purposes.
14. Do not take a measurement while or immediately aer nursing a
baby.
15. Patients should not drink, eat, bathe or engage in physical activity
for 30 minutes before using the thermometer. Aer eating, some
organs have to work, such as the stomach, intestinal tract, etc.,
generating extra heat which aects temperature accuracy.
Fig. 6
Please note that room temperature is for reference only.
Please do align the thermometer with a heat or cold source, such as
air conditioners, heaters, lights, etc. Otherwise, the measured
temperature may not be accurate.
!
!
In order to improve accuracy, please make sure that your forehead
is free from hair, sweat, or dirt.
Make sure the Infrared Measurement Sensor is clean before using
the thermometer.
Ensure that both the user and thermometer remain in the same
room with a stable airflow and a room temperature between 50.0 –
104.0°F (10.0 – 40.0°C) for at least 30 minutes before using this
thermometer.
!
!
!
Take a room temperature
Press the Measurement Trigger to power on the thermometer.
The thermometer will enter a self-check procedure. The three status
lights will be lit in green, orange, and red order. When the red light is on,
hold down the Measurement Trigger until the thermometer completes
the self-check and you see the Room Mode icon lit on the digital
display. Press and release the Measurement Trigger. About 1 second
later, you will hear a beep and the room temperature reading will be
displayed on the screen.
- 9 -

Related product manuals