Turntable Connection
IMPORTANT: If your turntable has an internal phono preamplier it
must be disabled/bypassed before connecting to the PA10. For
information on disabling/bypassing an internal preamplier please
check the turntable manual or contact your turntable manufacturer.
1. Connect an RCA cable and ground cable to your turntable.
2. Connect the RCA and ground cables to the Phono RCA Input
and Ground Terminal on the PA10.
Note: It is recommended for best performance to use a high quality
RCA cable with a <90pF capacitance rating. The Fluance 90pF RCA
cable (CA03) is available at www.uance.com/turntable
To Next Page
Loading...