Need help?Do you have a question about the Fluid Audio SRI-2 and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| Channels | 2 |
| Bit Depth | 24-bit |
| Connectivity | USB 2.0 |
| Frequency Response | 20 Hz - 20 kHz |
| Phantom Power | Yes |
| Inputs | 2 x XLR/TRS combo |
| Outputs | 2 x TRS |
| THD+N | <0.002% |
| Power Supply | USB bus powered |
| Sample Rate | 44.1kHz, 48kHz, 88.2kHz, 96kHz |
Pristine 24-bit/192 kHz audio quality with low latency and premium mic preamps for rich recordings.
Compact, USB-powered unit includes Cubase LE software for a complete music production system.
Robust aluminum housing and solid aluminum volume knob provide durability and a vintage studio gear feel.
Allows switching between two sets of studio monitors for comparing mixes on different speakers.
Controls the overall listening volume for headphones connected to the ¼" / 6.35mm jack.
Guidance on placing the SRI-2 and connecting it via USB to the host computer.
Steps for installing the SRI-2 drivers on Windows 7+ and automatic detection on Mac.
Identifies and describes all controls and indicators on the top surface of the SRI-2.
Details the XLR/TRS combo inputs and the headphone output jack on the front of the unit.
Describes the speaker outputs, external power input, and USB connection on the rear.
To Next Page