Fluke 333 Technical Data

Fluke 320 and 330 Series
Clamp Meters
•
Narrow body and jaw fit into small spaces
•
Backlight available on most models
•
Accurate low current measurements
•
Inrush current feature on most models
•
Auto shut-off
Technical Data
New Inrush Feature
A new innovation from Fluke! Fluke Clamp Meters
with the inrush feature measure motor starting
current like a circuit breaker or overload unit sees
it. One button lets you troubleshoot current surges
that can cause nuisance tripping. Fluke’s inrush
feature gives you a synchronized reading of the
current draw profile from motor start up.
For more information about Fluke’s new inrush
feature go to www.fluke.com/330 to view
Inrush, A Technology Brief.

Fluke 333 Specifications

General

Type	Clamp Meter
Continuity	≤ 30 Ω
Jaw Opening	30 mm
Safety Rating	CAT III 600 V
Battery Type	2 x AAA
AC Current Accuracy	±2% ±5 digits
AC Voltage Range	600 V
AC Voltage Accuracy	±1.5% ±5 digits
DC Voltage Range	600 V
DC Voltage Accuracy	±1% ±5 digits
Resistance Accuracy	±1% ±5 digits
Display	Digital
AC Current Range	0 - 400 A
Resistance Range	0 - 400 Ω