Fluke 336 - User Manual

®
PN 1618765 June 2001
© 2001 Fluke Corporation. All rights reserved. Printed in U.S.A.
1
33X
ClampMeters
Calibration Information
Introduction
WWarning
To avoid electric shock or injury, do not perform the performance tests or
calibration procedures unless you are qualified to do so.
The information provided in this manual is for the use of qualified personnel
only.
The 33X Calibration Information provides the information necessary to verify the performance and adjust
the calibration of the Fluke 333, 334, 335, 336, and 337 ClampMeters, hereafter known as the Meter(s).
The following information is included in this document:
• Safety Information and International Electrical Symbols
• Specifications
• Replacing the Batteries
• Cleaning
• Performance Tests
• Calibration Adjustment
• User-Replaceable Parts and Accessories
• Warranty Statement
See the 33x Instruction Cards for complete operating instructions.
Contact Information
To contact Fluke, call:
1-888-99-FLUKE (1-888-993-5853) in USA
1-800-36-FLUKE (1-800-363-5853) in Canada
+31 402-678-200 in Europe
+81-3-3434-0181 Japan
+65-276-6196 Singapore
+1-425-446-5500 in other countries
For additional information about Fluke, its products, and services, visit Fluke’s web site at:
www.fluke.com
To register this product, go to www.fluke-warranty.com

Summary

Introduction

Contact Information

Provides Fluke contact details, website, and product registration information.

Safety Information

International Electrical Symbols

Lists and explains international symbols used in the manual and on the meter.

Specifications

Replacing the Batteries

Cleaning

Performance Tests

Backlight Test

Keypad Test

Preparing for the Performance Test

Performance Test Procedure

Calibration Adjustment 333, 334, & 335

Calibration Adjustment 336 & 337

User-Replaceable Parts and Accessories

Limited Warranty and Limitation of Liability

Fluke 336 Specifications

General

Category	Clamp Meter
Voltage Measurement	AC/DC
Resistance Measurement	Yes
Continuity	Yes
Backlight	Yes
Jaw Opening	30 mm
True RMS	Yes
Operating Temperature	-10 °C to +50 °C
Frequency Measurement	Yes
Display	Digital
Safety Rating	CAT III 600 V
Current Measurement	AC
AC Voltage Range	600.0 V
DC Voltage Range	600.0 V
Battery Type	2 AA batteries