Fluke 362 User Manual

362
Clamp Meter
Users Manual

Fluke 362 Specifications

General

Type	Clamp Meter
Voltage Measurement	AC/DC
Resistance Measurement	Yes
Display	LCD
AC Response	True RMS
DC Voltage Resolution	0.1 V
AC Voltage Resolution	0.1 V
AC Voltage Accuracy	±(1.5% + 5 digits)
Resistance Accuracy	±(1.0% + 5 digits)
Safety Rating	CAT III 600 V
Current Measurement	AC
AC Current Resolution	0.1 A
DC Voltage Range	600.0 V
AC Voltage Range	600.0 V
Resistance Range	0.1 Ω to 4000 Ω
Resistance Resolution	0.1 Ω
Jaw Opening	30 mm
Current Measurement Range	200 A AC
Voltage Measurement Range	600 V AC/DC
Resistance Measurement Range	0.1 Ω to 4000 Ω
Battery Type	2 AAA batteries

Summary

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Introduction

Safety Information

The Meter

Auto Power Off

Explanation of the automatic power-off feature to conserve battery life.

Display Hold Function

How to use the display hold function to freeze readings.

AC and DC Current Measurements

Instructions for measuring AC and DC current using the clamp meter.

AC and DC Voltage Measurements

Guidance on measuring AC and DC voltage with the meter.

Resistance and Continuity Measurements

Procedure for measuring resistance and continuity.

Battery Replacement

Steps for safely replacing the meter's batteries.

Specifications

Electrical Specifications

Detailed electrical measurement ranges, resolution, and accuracy.

DC Voltage, Resistance, and Continuity Specs

Specifications for DC voltage, resistance, and continuity measurements.

Mechanical Specifications

Physical dimensions, weight, and jaw opening of the meter.

Environmental Specifications

Operating and storage temperature, humidity, and altitude limits.

Safety Specifications

Information on electromagnetic compatibility and safety compliance standards.