Fluke 322 - User Manual

®
PN 1631636 October 2001 Rev.1, 12/03
© 2001-2003 Fluke Corporation. All rights reserved. Printed in U.S.A.
1
32X
ClampMeters
Calibration Information
Introduction
WWarning
To avoid electric shock or injury, do not perform the performance tests or
calibration procedures unless you are qualified to do so.
The information provided in this manual is for the use of qualified personnel
only.
The 32X Calibration Information provides the information necessary to verify the performance and adjust
the calibration of the Fluke 321 and 322 ClampMeters, hereafter known as the Meter(s).
The following information is included in this document:
• Safety Information and International Electrical Symbols
• Specifications
• Replacing the Batteries
• Cleaning
• Performance Tests
• Calibration Adjustment
• User-Replaceable Parts and Accessories
• Warranty Statement
See the 321,322 Instruction Card for complete operating instructions.
Contact Information
To contact Fluke, call:
1-888-99-FLUKE (1-888-993-5853) in USA
1-800-36-FLUKE (1-800-363-5853) in Canada
+31 402-675-200 in Europe
+81-3-3434-0181 Japan
+65-738-5655 Singapore
+1-425-446-5500 in other countries
For additional information about Fluke, its products, and services, visit Fluke’s web site at:
www.fluke.com
To register this product, go to register.fluke.com

Summary

Introduction

Contact Information

Safety Information and Precautions

International Electrical Symbols

Explains international symbols used in the document and on the meter.

Clamp Meter Specifications

Replacing the Batteries

Cleaning the Clamp Meter

Performance Tests

Required Equipment for Performance Tests

Lists the necessary equipment for conducting performance tests on the meter.

Testing the Display

Procedure to test the clarity and contrast of the meter's display.

Hold Button Test Procedure

Preparing for Performance Tests

Performance Test Procedure Details

321 Calibration Adjustment Procedure

322 Calibration Adjustment Procedure

User-Replaceable Parts and Accessories

Limited Warranty and Limitation of Liability

Fluke 322 Specifications

General

Type	Clamp Meter
AC Current Accuracy	±2% ± 5 digits
Continuity	≤ 30 Ω
Safety Rating	CAT III 600 V
Battery Type	2 x AAA
AC Voltage Accuracy	1.5% ± 5 digits
DC Voltage Accuracy	1% ± 5 digits
Resistance Accuracy	1% ± 5 digits
Display	LCD
Jaw Opening	25 mm
AC Voltage Range	0-600 V