Need help?Do you have a question about the Fluke 345 and is the answer not in the manual?
General| DC voltage | 0 - 825 V |
|---|---|
| DC current (max) | 2000 A |
| Measuring category | CAT IV 600V |
| DC voltage resolution (min) | 0.001 V |
| AC current maximum resolution (probe) | 1 A |
| Battery type | AA |
| Battery technology | Alkaline |
| Certification | IEC 61010-1, IP40, EN60529, IEC/EN 61326-1:1997 A, CE |
| Clamp opening | 60 mm |
| Product color | Red, Yellow |
| Operating altitude | 0 - 2000 m |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
Weight and Dimensions| Depth | 52 mm |
|---|---|
| Width | 98 mm |
| Height | 300 mm |
| Weight | 820 g |
Details electrical specifications like accuracy, measuring range, and resolution.
Specifies parameters for DC, RMS, and AC current measurements.
Details Total Harmonic Distortion (THD) and Distortion Factor (DF).
Specifies parameters for DC, RMS, and AC voltage measurements.
Details specifications for single and three-phase power (watts) measurements.
Details specifications for single and three-phase apparent power (VA) measurements.
Details specifications for single and three-phase reactive power (VAR) measurements.
Details specifications for power factor (PF) and displacement power factor (DPF).
Details specifications for energy measurement in kilowatt-hours (kWHr).
Details specifications for frequency measurements from current or voltage sources.
Details specifications for the oscilloscope function, including current and voltage measurement.
Details specifications for capturing current-triggered events (inrush current).
Details logging memory capabilities, areas, and averaging periods.
Details safety standards, protection ratings, and working voltages for the instrument.
Highlights potential hazards and safety precautions during operation.
Describes the voltage measurement input terminals and safety ratings.
Covers initial setup steps, including power source and battery information.
To Next Page
