Need help?Do you have a question about the Fluke 305 and is the answer not in the manual?
General| Data hold | Yes |
|---|---|
| Continuity | 70 Ω |
| DC voltage | 600 V |
| Resistance (max) | 4000 Ω |
| Measuring category | CAT III 600V, CAT IV 300V |
| Product color | Orange, Yellow |
| Operating temperature (T-T) | 0 - 40 °C |
| Battery type | AA |
| Number of batteries supported | 2 |
Weight and Dimensions| Depth | 28 mm |
|---|---|
| Width | 58.5 mm |
| Height | 208 mm |
Provides contact information for Fluke technical support and service.
Instructions to prevent personal injury, electrical shock, fire, and damage.
Specific instructions for safe operation, handling, and environment.
Steps before operating the product, including battery checks and initial testing.
Guidelines for inspecting the product and removing batteries for storage.
Explains symbols used on the product and within the manual for safe operation.
Explains Measurement Categories (CAT III, CAT IV) and CSA C/US compliance.
Instructions for cleaning the product case using mild detergent and water.
Details AC/DC current, voltage ranges, resolution, and accuracy.
Details resistance ranges, resolution, and accuracy.
Identifies key components and features of the clamp meter.
Demonstrates how to power on the device and select measurement modes.
Explains how to use the hold function to retain readings.
Illustrates the process of measuring AC voltage.
Demonstrates how to measure AC current using the clamp.
Illustrates the process of measuring DC voltage.
Shows how to test for continuity and resistance readings.
Provides examples of using the hold function for different measurements.
Step-by-step guide for replacing the AAA batteries.
To Next Page
