Fluke 305 - Product Inspection and Maintenance; Pre-Use Inspection and Storage

Clamp Meter
Safety Information
5
• Do not use and disable the Product if it is damaged.
• Do not use the Product if it operates incorrectly.
• Before each use, examine the Product. Look for cracks or missing
pieces of the clamp housing. Also look for loose or weakened
components. Carefully examine the insulation around the Jaws.
• Examine the case before you use the Product. Look for cracks or
missing plastic. Carefully look at the insulation around the
terminals.
• Read all safety Information before you use the Product.
• Remove batteries to prevent battery leakage and damage to the
Product if it is not used for an extended period.
• Remove batteries to prevent battery leakage and damage to the
Product if is to be stored above its operating temperature.