IR Thermometer
Safety Information
3
• Before you use the Product, inspect the case. Do not use the Product if it
appears damaged. Look for cracks or missing plastic.
• See emissivity information for actual temperatures. Reflective objects
result in lower than actual temperature measurements. These objects
pose a burn hazard.
• Do not look directly into the laser with optical tools (for example,
binoculars, telescopes, microscopes). Optical tools can focus the laser
and be dangerous to the eye.
• Do not look into the laser. Do not point laser directly at persons or
animals or indirectly off reflective surfaces.
• Replace the batteries when the low battery indicator shows to prevent
incorrect measurements.
• Do not use the Product around explosive gas, vapor, or in damp or wet
environments.
• Use the Product only as specified or hazardous laser radiation exposure
can occur.
Caution
• To avoid damage to the Product, do not leave the thermometer on or
near objects of high temperature.
To Next Page
Loading...
