Fluke 718-100G - Page 3

3 Fluke Pressure Calibrators
Fluke 718 series via using 700 Series Pressure Modules
Range:
29 pressure modules, 0 – 1 in H
2
0 to 10,000 psi, 2.5 mbar to
700 bar. Over pressure per pressure module specs
Resolution:
Per pressure module specs
Accuracy:
To 0.025 % of full span, per pressure module specs
Functions:
Zero, Min, Max, Hold, Damp
Note: media compatibility per pressure module specs
Fluke 718 series via built in pump
Range:
-12 PSI or -850 mbar to full scale, Supported Pressure Units; psi, in H
2
0 (4 °C), in
H
2
0 (20 °C), cm H
2
0 (4 °C), cm H
2
0 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm
Loop Power:
Range:
24 V dc
Accuracy:
+/- 10 %
Note: Drive; 20 mA into 1000
Ω
for battery > 6.8V; 700
Ω
for battery 5.8 to 6.8 V
Measure Accuracy:
Range:
0 mA to 24 mA
Resolution:
0.001 mA
Accuracy:
0.015 % + 1 count
Fluke 717 Series via pressure module connector using optional Pressure Modules
Range:
29 pressure modules, 0 – 1 in H
2
0 to 10,000 PSI, 2.5 mbar to
700 bar ranges over pressure per pressure module specs
Resolution:
Per pressure module specs
Accuracy:
0.025 % of full span, per pressure module specs
Functions:
Zero, Min, Max, Hold, Damp, error calculation
Note: Media compatibility per pressure module specs
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa (31 40) 2 675 200 or
Fax (31 40) 2 675 222
In Canada (800) 36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fl uke.com
©2006 Fluke Corporation. All rights reserved.
Printed in U.S.A. 2/2006 2577864 D-EN-N Rev A
Fluke.
Keeping your world
up and running.
For additional detail on the 718, see the application note "Pressure calibration with the 718."
Literature code: 2577485 at
www.fl uke.com/library