Fluke 719PRO User Manual

October 2013
© 2013 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
719PRO
Pressure Calibrator
Users Manual

Fluke 719PRO Specifications

General

mA Range	0 to 24 mA
Loop Power	24 V DC
Operating Temperature	-10°C to 50°C
Warranty	3 years
Pressure Range	300 PSI (20 bar)
Pressure Resolution	0.01 psi
Pressure Media	Non-corrosive gases
Resolution	0.001 mA
Display	LCD
Storage Temperature	-20 °C to 60 °C
Pressure Accuracy	±0.025% of full scale

Summary

Limited Warranty and Liability

Safety Information

Home Menu Functionality

MENU Option Access

Accesses the product's main menu structure using function keys.

Active Display Control

Allows selection of the active display region (LOWER, MIDDLE, or UPPER).

Backlight Control

Toggles the product's backlight on and off from the Home Menu.

Zero Function Use

Zeroing Internal Sensors

Procedure for zeroing the product's internal pressure sensor.

Measure Pressure

Measure Pressure with External Modules

Measure and Generate Current (4-20mA)

Measure Voltage

Measure Temperature with an RTD

Pressure Switch Test

Transmitter Calibration

mA Input Function

Reads back the 4 mA to 20 mA output from a device under test.

Pressure-to-Current Transmitter Calibration

Percent Error Function

Remote Operation

Remote Interface

Using a PC terminal or program for remote control via RS-232.

Set up the RS-232 Port for Remote Control

Maintenance

Specifications