Fluke 715 User Manual

®
71X Series
Process Calibrators
Calibration Manual
PN 686540
January 1998 Rev. 11, 3/12
© 1998-2012 Fluke Corporation, All rights reserved. Printed in U.S.A. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
w ww . . co m
information@itm.com1.800.561.8187

Fluke 715 Specifications

General

Battery voltage	9 V
Battery technology	Alkaline
Display type	LCD
Display digits	5 digits
Drop proof up to	1 m
Operating altitude	0 - 3000 m
Operating vibration	2 G
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	0 - 95 %
Holster included	Yes

Weight and Dimensions

Depth	32 mm
Width	87 mm
Height	187 mm
Weight	330 g

Summary

Limited Warranty and Limitation of Liability

Introduction

Precautions and Safety Information

Explanation of International Symbols

Specifications

712 Specifications

Firmware V1.1 and Earlier

Technical specifications for the 712 calibrator with firmware version V1.1 or older.

Firmware V1.2 through V1.9

Technical specifications for the 712 calibrator with firmware versions V1.2 to V1.9.

Firmware V2.0 and Later

Technical specifications for the 712 calibrator with firmware version V2.0 and newer.

714 Specifications

Firmware Earlier than v2.0

Technical specifications for the 714 calibrator with firmware versions prior to V2.0.

Firmware V2.0 and Later

Technical specifications for the 714 calibrator with firmware version V2.0 and newer.

715 Specifications

Firmware Earlier than V2.0

Technical specifications for the 715 calibrator with firmware versions prior to V2.0.

Firmware 2.0 and Later

Technical specifications for the 715 calibrator with firmware version 2.0 and newer.

717 Specifications

Pressure

Detailed pressure specifications for the 717 calibrator series models.

718 and 718Ex Specifications

Static Awareness

Basic Maintenance

Cleaning

Instructions for cleaning the calibrator case using a damp cloth.

Replacing the Battery

Procedure for replacing the battery in various 71X calibrator models.

718Ex Approved Batteries

Replacing the Fuse

Instructions and troubleshooting for replacing fuses in the calibrator.

Required Equipment

Verification

Preparing for Verification

Steps to prepare test equipment and the unit under test before verification.

712 Verification (V1.1 and Earlier)

Verification procedures for the 712 calibrator with firmware V1.1 or earlier.

712 Verification (V1.2 through V1.9)

Verification procedures for the 712 calibrator with firmware V1.2 to V1.9.

712 Verification (V2.0 and Later)

Verification procedures for the 712 calibrator with firmware V2.0 and newer.

714 Verification (Earlier than V2.0)

Verification procedures for the 714 calibrator with firmware prior to V2.0.

714 Verification (V2.0 and Later)

Verification procedures for the 714 calibrator with firmware V2.0 and newer.

715 Verification (Earlier than V2.0)

DC Voltage Source Verification

Procedure to verify the DC voltage source function of the 715 calibrator.

DC Current Source Verification

Procedure to verify the DC current source function of the 715 calibrator.

Keypad Test

Testing the functionality of the calibrator's keypad buttons.

DC Current Measure Verification

Procedure to verify the DC current measure function of the 715 calibrator.

DC Voltage Measure Verification

Procedure to verify the DC voltage measure function of the 715 calibrator.

Display Verification

Testing the proper display of all segments on the calibrator's LCD.

715 Verification (V2.0 and Later)

DC Voltage Source Verification

Verifying the DC voltage source function for later 715 firmware versions.

DC Current Source Verification

Verifying the DC current source function for later 715 firmware versions.

DC Current Measure Verification

Verifying the DC current measure function for later 715 firmware versions.

DC Voltage Measure Verification

Verifying the DC voltage measure function for later 715 firmware versions.

717 Verification

Pressure Verification

Procedures for verifying pressure measurement accuracy on 717 models.

mA Measure Verification

Procedure for verifying the mA measure function on the 717 calibrator.

mA Loop Power Verification

Verifying the mA loop power function on the 717 calibrator.

Sensor Jack Verification

Checking the sensor jack functionality on the 717 calibrator.

Display Verification

Testing the calibrator's display segments for proper operation.

718 and 718Ex Verification

Pressure Verification

Procedures for verifying pressure measurement accuracy on 718/718Ex models.

Leak Test Verification

Procedure for performing leak tests on 718 and 718Ex calibrators.

mA Measure Verification

Procedure for verifying the mA measure function on 718/718Ex calibrators.

mA Loop Power Verification (718 Only)

Verifying the mA loop power function specific to 718 models.

Sensor Jack Verification

Checking the sensor jack functionality on 718/718Ex calibrators.

Display Verification

Testing the display segments for proper operation on 718/718Ex.

719 Verification

Display Verification

Testing the calibrator's display segments for proper operation.

Pressure Verification

Calibration steps for pressure measure on 719 (V1.0).

Leak Test Verification

Procedure for performing leak tests on the 719 calibrator.

mA Measure Verification

Procedure for verifying the mA measure function on the 719 calibrator.

mA Source Verification

Procedure for verifying the mA source function on the 719 calibrator.

mA Loop Power Verification

Verifying the mA loop power function on the 719 calibrator.

Sensor Jack Verification

Checking the sensor jack functionality on the 719 calibrator.

Calibration

Preparing for Calibration

Steps to prepare test equipment and the unit for calibration.

712 Calibration (V1.1 and Earlier)

Millivolts Measure

Calibration steps for the millivolt measurement function on 712 (V1.1).

Resistance Measure

Calibration steps for the resistance measure function on 712.

mA Measure

Calibration steps for the mA measure function on 712.

712 Calibration (V1.2 through V1.9)

712 Calibration (V2.0 and Later)

OHMS INPUT

Calibration procedure for the OHMS INPUT function on 712 (V2.0+).

OHMS OUTPUT Low Range

Calibration procedure for the low range OHMS OUTPUT on 712 (V2.0+).

OHMS OUTPUT High Range

Calibration procedure for the high range OHMS OUTPUT on 712 (V2.0+).

714 Calibration (Earlier than V2.0)

Temperature Measure

Calibration steps for temperature measurement on 714 (pre-V2.0).

Temperature Source

Calibration steps for temperature source function on 714 (pre-V2.0).

Thermocouple Block Calibration

Calibration of the thermocouple block on the 714 calibrator.

714 Calibration (V2.0 and Later)

mV OUTPUT

Calibration procedure for mV output on 714 (V2.0+).

mV INPUT

Calibration procedure for mV input on 714 (V2.0+).

CJC

Calibration procedure for Cold Junction Compensation (CJC) on 714.

715 Calibration (Earlier than V2.0)

mA/Volts Measure

Calibration steps for mA/Volts measure on 715 (pre-V2.0).

715 Calibration (V2.0 and Later)

mA/Volts Source Measure

Calibration steps for mA/Volts source measure on 715 (V2.0+).

717 Calibration (Earlier than V2.0)

mA Measure

Calibration steps for mA measure on 717 (pre-V2.0).

Pressure Measure

Calibration steps for pressure measure on 717 (pre-V2.0).

717 Calibration (V4.0 and Later)

mA Measure

Calibration steps for mA measure on 717 (V4.0+).

Pressure Measure

Calibration steps for pressure measure on 717 (V4.0+).

718 Calibration (Earlier than V2.0)

mA Measure

Calibration steps for mA measure on 718 (pre-V2.0).

Pressure Measure

Calibration steps for pressure measure on 718 (pre-V2.0).

718 Calibration (V4.0 and Later)

mA Measure

Calibration steps for mA measure on 718 (V4.0+).

Pressure Measure

Calibration steps for pressure measure on 718 (V4.0+).

718Ex Calibration

mA Measure

Calibration steps for mA measure on 718Ex.

Pressure Measure

Calibration steps for pressure measure on 718Ex.

718 Calibration (V2.0 to V3.9)

mA Measure

Calibration steps for mA measure on 718 (V2.0-V3.9).

Pressure Measure

Calibration steps for pressure measure on 718 (V2.0-V3.9).

719 Calibration (V1.0)

mA Measure

Calibration steps for mA measure on 719 (V1.0).

Pressure Measure

Calibration steps for pressure measure on 719 (V1.0).

mA Output Calibration

Calibration procedure for mA output on the 719 calibrator.

Replacement Parts and Accessories

ACCESSORIES

List of optional accessories for the 71X calibrator series.