EasyManuals Logo

Fluke 715 Instruction Sheet

Fluke 715
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
715 English Instruction Sheet
Page
1
®
715
Volt/mA Calibrator
Instruction Sheet
Introduction
The Fluke 715 Volt/mA Calibrator is a source and measurement
tool for 0 to 24 mA current loop testing and dc voltage from 0 to
10 V. The calibrator does not source and measure
simultaneously.
Your calibrator is supplied with a Flex-Stand holster, a set of
test leads, an installed 9 V alkaline battery, and this instruction
sheet.
Summary of Calibrator Capabilities
Function Range Resolution
dc mV input 0 to 100 mV 0.01 mV
dc mV output
dc V input 0 to 10 V 0.001 V
dc V output
dc mA input 0 to 24 mA 0.001 mA
dc mA output
Loop power
output
24 V dc output N/A
PN 650314 July 1997 Rev. 2, 11/98
1997, 1998 Fluke Corporation. All rights reserved. Printed in U.S.A.
All product names are trademarks of their respective companies.
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

Other manuals for Fluke 715

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fluke 715 and is the answer not in the manual?

Fluke 715 Specifications

General IconGeneral
Battery voltage9 V
Battery technologyAlkaline
Display typeLCD
Display digits5 digits
Drop proof up to1 m
Operating altitude0 - 3000 m
Operating vibration2 G
Storage temperature (T-T)-40 - 60 °C
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)0 - 95 %
Holster includedYes
Weight and Dimensions IconWeight and Dimensions
Depth32 mm
Width87 mm
Height187 mm
Weight330 g

Related product manuals