Fluke DSX-PLA-004-RKIT

Need help?

Do you have a question about the Fluke DSX-PLA-004-RKIT and is the answer not in the manual?

Summary

Product Identification and Kit Contents

Replacement Kits and Adapters

Identifies replacement kits (DSX-PLA-004-RKIT, DSX-PLA-804-RKIT, DTX-PLA002PRP) and their corresponding adapters for permanent link adapters.

Specifications and Contact Information

Product Specifications

Details typical life of tip contacts and where to find more performance specifications for DSX or DTX adapters.

Contact Fluke Networks

Provides contact details including website, email, phone numbers, and physical address for Fluke Networks.

Limited Warranty Information

Outlines the warranty period for parts, accessories, product repairs, and services.

Summary

Product Identification and Kit Contents

Replacement Kits and Adapters

Identifies replacement kits (DSX-PLA-004-RKIT, DSX-PLA-804-RKIT, DTX-PLA002PRP) and their corresponding adapters for permanent link adapters.

Specifications and Contact Information

Product Specifications

Details typical life of tip contacts and where to find more performance specifications for DSX or DTX adapters.

Contact Fluke Networks

Provides contact details including website, email, phone numbers, and physical address for Fluke Networks.

Limited Warranty Information

Outlines the warranty period for parts, accessories, product repairs, and services.

This document describes replacement parts kits for DSX and DTX permanent link adapters, specifically the DSX-PLA-004-RKIT, DSX-PLA-804-RKIT, and DTX-PLA002PRP. These kits are designed to replace worn components on the DSX-PLA004, DSX-PLA804, and DTX-PLA002 adapters, respectively.

Function Description:

The kits provide essential replacement parts to maintain the functionality and performance of Fluke Networks' permanent link adapters. These adapters are crucial components in network testing, used for certifying and troubleshooting copper cabling infrastructure. Over time, the RJ45 tips, latches, and cases of these adapters can wear out due to repeated use, impacting test accuracy and reliability. By replacing these worn parts, the kits help extend the lifespan of the adapters and ensure continued accurate testing. The replacement process is designed to be user-friendly, allowing technicians to perform maintenance in the field or workshop.

Kit Contents:

Each kit includes:

Two RJ45 tips: These are the primary contact points that connect to the RJ45 jacks of the cables being tested. They are subject to wear and tear from repeated insertions and extractions.
Two latches: These secure the RJ45 tip within the adapter and provide the necessary retention when connected to a cable.
Two screws: Used to fasten the adapter's case components together.
Two conductive washers: These are important for maintaining proper electrical grounding and shielding within the adapter, contributing to accurate test results.
Two top and bottom cases (DSX kits only): These provide the structural housing for the internal components of the adapter. The DSX-PLA-004-RKIT and DSX-PLA-804-RKIT include these case parts.
Two conductive pads (DSX-PLA-804-RKIT only): These pads are specifically included in the DSX-PLA-804-RKIT to ensure proper electrical contact and performance for the DSX-PLA804 adapter.
Installation instructions: A guide to assist users in correctly replacing the components.

Important Technical Specifications:

Life of tip contacts (typical): > 5,000 cycles. This specification indicates the expected durability of the RJ45 tips, highlighting their robust design for frequent use in professional testing environments. Exceeding this number of cycles typically necessitates replacement to maintain performance.
Compliance: The product complies with WEEE Directive marking requirements, indicating its classification as a "Monitoring and Control Instrumentation" product (Category 9, WEEE Directive Annex I). This means it should not be discarded with domestic household waste and should be returned to the manufacturer or distributor for proper disposal.
Environmental Friendly Use Period (EFUP): 40 years under China Regulation. This period signifies the time before hazardous substances within the product are likely to leak out, posing potential harm to health and the environment.

Usage Features:

Ease of Maintenance: The kits are designed for straightforward replacement of worn parts, enabling users to perform maintenance without requiring specialized tools beyond a Phillips screwdriver.
Cost-Effective Solution: Instead of replacing an entire adapter, these kits allow for the replacement of specific worn components, offering a more economical solution for maintaining equipment.
Ensures Continued Accuracy: Replacing worn tips and other components helps maintain the accuracy and reliability of test results, which is critical for certifying network cabling to industry standards.
Compatibility: Each kit is specifically designed for particular adapter models (DSX-PLA-004-RKIT for DSX-PLA004, DSX-PLA-804-RKIT for DSX-PLA804, and DTX-PLA002PRP for DTX-PLA002), ensuring perfect fit and functionality.

Maintenance Features:

Step-by-Step Installation Guide: The included instructions provide clear guidance for replacing the tip and latch.
1. Remove the adapter from the tester.
2. Use a Phillips screwdriver to loosen the screw on the connector case, then remove and replace the tip or latch.
3. Ensure the conductive washer is correctly positioned on the case screw.
4. For DSX-PLA804 adapters, ensure conductive pads are placed in the case top and bottom.
5. Reassemble the connector case and tighten the screw.
Caution against Pin Damage: The instructions explicitly warn users not to break the pin during the replacement process, emphasizing careful handling to avoid damaging the adapter's internal components.
Environmental Responsibility: The WEEE compliance and EFUP information guide users on the proper disposal and environmental considerations for the product at the end of its life.

For more detailed performance specifications on the DSX or DTX adapters, users are directed to consult the Versiv Series Technical Reference Handbook or the DTX Technical Reference Handbook, or visit the Fluke Networks website. Fluke Networks provides global support, operating in over 50 countries, with contact information for technical support, sales, and general inquiries available via their website, email, and phone numbers. The product also comes with a limited warranty, covering parts, accessories, product repairs, and services for 90 days, unless otherwise specified.