To Next PageTo Next Page
Need help?Do you have a question about the Fluke PM2811 and is the answer not in the manual?
General safety procedures for instrument use.
Defines common symbols used in the manual.
Checking shipment contents for completeness and damage.
Connecting the power supply to the electrical mains.
Procedures to verify correct operation after installation.
Steps for powering up and initial configuration.
Overview of front panel keys and their functions.
Step-by-step guide for basic operations.
Detailed guide to using the front panel controls.
Controlling the power supply via GPIB interface.
Understanding the operational limits and ratings.
Connecting channels in series/parallel and multiple loads.
General safety procedures for instrument use.
Defines common symbols used in the manual.
Checking shipment contents for completeness and damage.
Connecting the power supply to the electrical mains.
Procedures to verify correct operation after installation.
Steps for powering up and initial configuration.
Overview of front panel keys and their functions.
Step-by-step guide for basic operations.
Detailed guide to using the front panel controls.
Controlling the power supply via GPIB interface.
Understanding the operational limits and ratings.
Connecting channels in series/parallel and multiple loads.
General| Category | Power Supply |
|---|---|
| Channels | 1 |
| Output Voltage Range | 0 - 30 V |
| Voltage Resolution | 10 mV |
| Current Resolution | 1 mA |
| Ripple and Noise | < 1 mVrms |
| Interface | RS-232 |
| Power Supply | 115/230 V AC, 50/60 Hz |
