Operator Safety 1 - 1
1 OPERATOR SAFETY
Read this pa
to install and use the instrument.
1.1 INTRODUCTION
The instrument described in this manual is desi
ned to be used only by qualified
personnel.
WARNING: Servicin
described in this manual is to be done only by
qualified service personnel. To avoid electrical shock, do not
service the instrument unless you are qualified to do so.
1.2 SAFETY PRECAUTIONS
For the correct and safe use of this instrument it is essential that both operatin
and service personnel follow
enerally accepted safety procedures in addition to
the safety precautions specified in this manual. Specific warnin
and caution
statements, where they apply, will be found throu
hout the manual. Where
necessary, the warnin
and caution statements and/or symbols are marked on
the instrument.
1.3 CAUTION AND WARNING STATEMENTS
CAUTION: Is used to indicate correct operatin
or maintenance procedures in
order to prevent dama
e to or destruction of the equipment or other
property.
WARNING: Calls attention to a potential dan
er that requires correct
procedures or practices to prevent personal injury.
To Next Page
Loading...