Need help?Do you have a question about the Fluval 07 series and is the answer not in the manual?
General| Media Baskets (Fluval 107, 207, 307) | 3 |
|---|---|
| Media Baskets (Fluval 407) | 4 |
| Tank Size | Varies by model |
| Dimensions | Varies by model |
| Model | Fluval 07 series |
| Type | Canister Filter |
| Pump Output (Fluval 107) | 550 L/H (145 US Gal/H) |
| Pump Output (Fluval 307) | 1150 L/H (304 US Gal/H) |
| Pump Output (Fluval 407) | 1450 L/H (383 US Gal/H) |
| Wattage (Fluval 207) | 11W |
| Wattage (Fluval 307) | 15W |
| Wattage (Fluval 407) | 18W |
| Priming | Self-priming |
Emphasizes reading and following all safety instructions before use to prevent damage or loss of fish life.
Details precautions to avoid electric shock, including unplugging if appliance falls into water or shows leakage.
Advises close supervision when children use the appliance, and that children should not play with it.
Instructs to always unplug appliances before placing hands in water or performing maintenance.
Stresses secure installation before operation and avoiding running the filter dry.
Requires cleaning and lubricating the motor head gasket every 3 months and replacing it yearly.
Decide filter placement, adhering to gravity-fed system requirements and aquarium setup.
Rinse media, place baskets correctly, fit foam screen, and securely assemble the canister cover.
Insert AquaStop valve, pump to prime, plug in, and check for proper operation and water flow.
Regulate water flow using the AquaStop lever and address any air trapped in the filter system.
Steps to close AquaStop, unplug, release valve, and move unit to drain water before cleaning.
Instructions for replacing chemical media, rinsing biological media with aquarium water, and cleaning foam.
Guides on placing media baskets, pre-filter, lubricating gasket, replacing cover, and reconnecting AquaStop valve.
To Next Page
