EasyManua.ls Logo

Flux FLUXTRONIC - Page 55

Flux FLUXTRONIC
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Attachment FLUXTRONIC Automatic Mode 55 / 84
ENGLISH
When the battery capacity is almost empty, the information line shows
"LOW BATT" alternatively with the current line. When this is the case, the
electronic unit can run normally for up to 2 weeks.
When the battery capacity is so low that processing can no longer be reliably guaran-
teed, the display only shows "LOW BATT" and the functions are no longer operated.
6 Commissioning
Attention!
If the material of the flowmeter is not resistant to the liquid
to be transferred, it must not be used.
Observe the chemical resistance and internal operating
instructions.
Note!
Check if the materials of the flow meter are appropriate for the
applications.
Note!
Generally replace a defect signalling cable.
7 In operation
Regularly check the flow meter for function.
8 Repair
> Depressurise the system.
> Separate pump from current.
> Empty hose, flowmeter and valves.
> Always replace defective parts.
> Only use genuine spare parts .

Related product manuals