Need help?Do you have a question about the Flux FMC 100 and is the answer not in the manual?
General| Brand | Flux |
|---|---|
| Model | FMC 100 |
| Category | Measuring Instruments |
| Language | English |
Details what is included in the product delivery.
Outlines terms for product liability, warranty, and guarantee.
Lists additional documents provided with the operating instructions.
Instructions on how to store and keep operating manuals accessible.
Explains formatting conventions used for clarity in the manual.
Refers to safety instructions summarized in Section 2.
Explains the meaning of shapes and colours used for safety signs.
Defines signal words (Danger, Warning, Caution) and their implications.
Specifies the intended purpose and limitations of the flow meters.
Comprehensive safety advice for safe operation, including specific hazards.
Guidelines for safe handling and installation in potentially explosive environments.
Detailed explanation of the mechanical operation of the nutating disc meter.
Discusses factors affecting filling accuracy and required conditions.
Essential checks, installation notes, and warnings before initial use.
Step-by-step guide for replacing specific components of the device.
Graphical representation of pressure drop versus flow rate.
Shows how pressure and temperature affect performance.
Table detailing flow rates, pressure, viscosity, temperature, accuracy, and materials.
Details the device and its compliance with safety requirements for hazardous areas.
Refers to the confidential report documenting the examination results.
Lists any specific conditions required for the safe operation of the equipment.
Confirms fulfillment of safety requirements as per relevant standards.
Specifies equipment and systems for use in potentially explosive atmospheres.
Details the required marking information for the equipment.
Details the device and its compliance with safety requirements for hazardous areas.
Refers to the confidential report documenting the examination results.
Lists any specific conditions required for the safe operation of the equipment.
Confirms fulfillment of safety requirements as per relevant standards.
Details changes and adjustments to the original certificate and standards.
Details changes and adjustments to the original certificate and standards.
Lists the EU directives the product complies with.
Specifies the harmonized standards applied for compliance.
Declaration regarding the product's design for operation in hazardous zones.
To Next Page
