Flux beamo User Manual

Instructions on how to effectively use the user manual and understand its symbols.

Explains the fundamental principles and components of a CO2 laser cutter.

Essential safety guidelines to prevent injury and property damage during operation.

Covers electrical safety, fire prevention, smoke/fume management, and operating environment.

Details product certifications and user responsibilities for safe operation.

Step-by-step guide to unboxing the beamo, including accessory kit contents.

Instructions for assembling the machine and connecting essential components.

Guide to connecting to Wi-Fi and installing the Beam Studio software.

Step-by-step instructions for correctly adjusting the laser focus.

Using camera preview, importing test files, and understanding test results.

Introduction to the Beam Studio software interface and its main components.

Explains bitmap/vector engraving, layer settings, and saving scenes.

Navigating the touchscreen and using recommended design software.

Guide on using the Smart Trace feature to digitize artwork.

How to test speed and power settings on new materials.

Details on working with wood, leather, acrylic, paper, glass, and metal.

Lists safe materials and hazardous materials to avoid.

Provides links to online resources for design inspiration and files.

Procedures for lubricating moving parts and cleaning the work area.

Guide for cleaning optics, maintaining the water cooler, and optical path alignment.

Step-by-step guide to safely replace the laser tube.

Solutions for no laser output, cuts not going through material, and overheating.

Troubleshooting for door sensor, laser head movement, and camera alignment/preview problems.

Addresses Wi-Fi connection issues and software unexpected quits.

Details technical specifications, storage, and transport guidelines.

Contact information for FLUX support and environmental disposal advice.