34
monochromic, which is optimized for built-in
"Monochromatic Engraving" parameters. When "Shading"
is enabled, images will be transformed into greyscale,
which is optimized for built-in "Shading Engraving"
parameters.
The "Threshold" value can be adjusted when “Shading” is
disabled. This function is based on the RGB color model
which defines colors from 1 to 255. 1 stands for black and
255 stands for white. For example, setting the threshold
value to 125 will turn all colors above 125 into white.
3.4 VECTOR ENGRAVING
A vector image is composed of paths defined by multiple
points. Each path, curve or polygon is constructed with its
own formula which means the quality will not be affected
when resizing the image. Vector images are especially
suitable for logos and typesetting materials. Beam studio
is compatible with SVG and DXF vector formats.
Layers is a good way to manage a complex artwork
when creating a vector image. Take Adobe Illustrator for
example, the design can be organized by either different
color groups or different layers. Beam Studio can read the
layer setting so different engraving parameters can be set
for each layer. Cutting and engraving can be processed in
the same time by this manner.
To Next Page
Loading...
