Need help?Do you have a question about the Flux Beambox Pro and is the answer not in the manual?
General| Laser Type | CO2 Laser |
|---|---|
| Laser Power | 50W |
| Max Engraving Speed | 300 mm/s |
| Resolution | 1000 DPI |
| Z-Axis Travel | 80 mm |
| Cooling | Water Cooling |
| Air Assist | Yes |
| Working Area | 600 x 375 mm |
| Connectivity | Wi-Fi, Ethernet, USB |
| Dimensions | 820 x 670 x 300 mm |
| Maximum Material Thickness | Varies by material. |
| Supported File Types | JPG / PNG / SVG / DXF / AI |
| Camera | Yes |
| Operating Systems | Windows, macOS |
| Software Compatibility | FLUX Studio |
Essential safety precautions and warnings before operating the Beambox.
Instructions for connecting the Beambox to a network and setting up software.
Procedure for correctly adjusting the laser's focus using the focus probe.
Explanation of the various tools and panels in the Beam Studio interface.
Detailed steps for aligning the laser's optical path using mirrors.
Step-by-step guide for safely replacing the laser tube.
Diagnosing and resolving issues where the laser is not firing.
Troubleshooting why the laser is not cutting through the material.
Resolving error codes related to the cooler and door status.
Addressing overheating warnings and laser head return problems.
Solutions for camera alignment, preview speed, and connection issues.
Fixes for software unexpectedly quitting and IP address configuration.
To Next Page
