88
7.5 #902 OVERHEATED
1. Check if the room temperature is 5°C- 35°C (41°F -
95°F).
2. Go to touchscreen > Maintain, and check if the
temperature is 5°C- 35°C (41°F - 95°F).
3. If there is a huge difference between the room
temperature and the temperature shown on the touch
screen, please contact FLUX Support.
7.6 THE LASER HEAD DOESN’T RETURN
TO REAR LEFT CORNER
1. Gently move the laser head to the center of the bed.
2. Go to touchscreen > Maintain, the laser head should
first move to the top and then move to the rear left.
To Next Page
Loading...
