52
6.1 KEEP EVERYTHING LUBRICATED
Clean and lubricate the guiding rods and rail periodically can
extend the lifetime of the moving parts. The frequency recom-
mended is once every 1 - 2 weeks.
1. Wipe away the oil grease on the guiding rodsand rail
using a paper towel.
2. Apply lubricant on the guiding rods of the Y axis.
3. Apply lubricant on the top and the side of the linear
rail of the X axis.
4. Move the laser head up-and-down, left-and-right
several times to evenly distribute the lubricant.
To Next Page
Loading...
