18 / 60 Operating Instructions FMC
2.3 Intended use
Flow meters serve for convenient measuring of liquids.
Do not expose the flow meters to the weather.
Only use flow meters according to the technical data.
Only use clean liquids.
2.4 Safety instructions
All safety instructions must be observed and followed.
Failure to follow the safety instructions may lead to serious injury or death or cause
environmental and/or property damage. Adherence to the safety instructions contained
in these operating instructions will help you to avoid risks and to ensure that the product
is used to its full potential.
Safety instructions on the activities are listed at the start of the respective chapter.
Special safety instructions on individual action steps are given under the respective
action step.
Attention!
> Make sure that the operator has read and understood the
operating instructions.
Danger of poisoning from harmful substances / vapours
> Take off spilled harmful substances.
> Never eat or drink when filling harmful liquids.
Attention - Danger from splashing liquids!
> The maximum operating pressure and operating temperature
must not be exceeded.
> High operating pressure may result in the containers or the hoses
bursting or becoming loose. Make sure that excessive pressure
does not result when filling a container.
> Fill carefully and at an appropriate speed to avoid leakage of the
liquid.
Caution!
> Immediately inform the responsible supervisor about defects on
the device.
Caution - Risk of injury!
> Follow internal instructions.
> Wear protective clothing (face and breathing protection, protec-
tive gloves, etc.).
To Next Page
Loading...
