LED indicator:
Solid Color = Whole Value
Blinking Color = Half Increment
Ex. Solid green indicates 10V
Flashing green indicates 10.5V
Battery Level Check:
Press and hold power button till white. A blinking colored light indicates remaining charge.
Note: LED flashes while battery charges. Once < 15% is reached, red light will blink alternately with
voltage.
Working with modes: Modes work by pressing and releasing the power button.
Bluetooth – Hold the power button until a blue light appears and immediately release the power
button. A blue blinking light indicates pairing mode is available for 60 seconds. To deactivate
Bluetooth, hold the power button and release when the yellow light flashes.
Travel Mode (Shutdown) – Press and hold the power button until the red light flashes. This mode is
for when you want to avoid unnecessary discharge and / or comply with travel laws. To reactivate,
connect / disconnect to a USB-C port.
Reset (Factory Settings) – Should you experience abnormal behavior, hold the power button and the
To Next Page
Loading...