1
FLX.BIKE
22
lCD sCreeN proGrAMMiNG
Please check the default settings on your bike to ensure they are correct and in
compliance with local laws.
It is possible to change these defaults by entering the “Programming Mode” by
fast pressing the “ i ” button 2 times.
The options can be cycled through with “ + ” and “ - ” buttons and adjusted as
you see t. To save and exit navigate to “Exit” and press the “ i ” button on the
controller.
For the full list of features on the LCD display, please refer to the following:
x.bike/manual
To Next Page
Loading...
