To Next PageTo Next Page
Need help?Do you have a question about the Fly Synthesis STORCH S and is the answer not in the manual?
General information about the importance of regular maintenance and corrective actions.
Outlines the STORCH maintenance schedule based on 10 inspections within specified limits.
Details the procedures for pre-flight inspections, referencing the Flight Manual.
Lists additional daily inspection tasks beyond pre-flight checks, covering cowlings, fuel, etc.
Specific checks required after 10 flight hours, including spark plugs and exhaust system.
Tasks for the 20-hour inspection, covering battery, propeller, and control systems.
50-hour inspection items including cylinders, starter, and flight control linkages.
100-hour checks involving exhaust, filters, engine housing, and landing gear.
150-hour inspection requiring qualified personnel, focusing on engine components.
Checks for 200 hours or 2 years, including control cables and dampers.
Checks for 300 hours or 2 years, including control cables and landing gear.
Annual checks for cylinder head nuts, rivets, wing fittings, and exhaust system.
General| Wing span | 9.00 m (29 ft 6 in) |
|---|---|
| Empty weight | 220 kg (485 lb) |
| Engine | Rotax 582 |
| Power | 48 kW (64 hp) |
| Cruise speed | 140 km/h (87 mph, 76 kn) |
| Gross weight | 450 kg |
| Stall speed | 55 km/h |
| Rate of climb | 5 m/s |
| Max Takeoff Weight | 450 kg |
| Takeoff Distance | 100 m |
| Landing Distance | 100 m |
