Flybar AERO-3 - Pre-Ride Checks and Maintenance; Cleaning and Material Care; Folding and Unfolding Operation

Pre-Ride Check list & Maintenance
Check that all parts are suciently ghtened and the handlebar is securely xed.
Check that all wheels can be spun smoothly and that deck grip tape has tracon.
All nuts and bolts may lose ghtness over me. Check ghtness of all nuts and bolts
every me you ride.
Over me, wheels may become worn out with natural wear and tear. Check the con-
dion of the wheels regularly and replace them when necessary. Please contact us at
ybar.com or 845-647-8400 for replacements.
DO NOT use a wet cloth, alcohol, industrial cleaners or solvents to clean the scooter
as this may result in loss of gloss, the removal of decals or dissolve the materials in
the scooter.
DO NOT use aachments not included with the scooter. Do not aempt to make any
modicaons to the scooter.
STORE IN A COOL DRY PLACE. Some metal parts may corrode aer a certain me,
especially when used near the sea or le outdoors too oen.
(Adult Required)
Step1 Unlock: Press red buon fully, pulling cu up at the same me.
Step 2 Fold: Press bar down fully to locked folded posion.
Step 3 Unfold: Pull cu and push bar up to locked vercal posion.
FOLDING/UNFOLDING