Instructions of basic operations and
indicators
Power
on/off
Slide the power switch to the right, then controller
will be turned on
Slide the power switch to the left, then controller
will be turned off.
Power indicator will slowly flash green twice
before it goes out indicatingcontroller is
successfully turned on
Bluetooth
pairing
Press and hold Logo button for over 5 seconds
after controller is turned on
Status indicator will quickly flash blue indicating
controller is entering pairing mode
Normal
working
Reconnecting
with Bluetooth
Charging
Low Power
Activating
button
mapping
Calibrating
stick
Controller is working normally after Bluetooth
connection is successful
Under controller mode:LED indicator stay blue
Under keyboard-mouse mode: LED indicator stay orange
Use the paired controller again, click Logo button
to automatically reconnect with Bluetooth
Status Indicator will be the same as normal
working condition after successfully connected
Charging
Charging completed
Power indicator will stay red
Power indicator goes out
20% power remains
10% power remains
Power indicator slowly flashes green
Power indicator quickly flashes green
Use data cable provided with phone to connect
controller’s Flymagic interface and Android
phone, and slide the power switch to the right
again, controller will enter button mapping
activation mode
Under activation mode, Power indicator will stay
green, LED indicator quickly flashes orange;
After activation is successfully, LED indicator will
stay orange for 5 seconds before it goes out
Press and hold SELECT + START buttons for 2
s
econds at the same time
LED indicator will slowly flashes blue twice
indicating stick calibration is successful
Performance specifications
Supported
platforms
Android Android phones and tablets with Bluetooth 4.0, while Android system is 4.4 and above
Supported
phone size
Android 6.3” and under, thickness no greater than 8.5mm
Connection
method
Bluetooth 4.0
Distance
of use
Less than 10m
Battery life About 80 hours
Battery
capacity
300mAh lithium battery
Power
consumption
Operational current ≤2.5mA;
standby current ≤4uA
Charging
input
5V-100mA
Charging time
About 3-4 hours
Controller
weight
120g
Web: www.flydigi.com Facebook: Flydigi
FAQ
What if the controller indicator is not on?
Please check whether controller has sufficient power.
1
What if button mapping cannot be activated?
Please confirm whether operation is correct, please refer to button mapping
activation wizard in Flydigi Controller Assistant for details;
Please use original data cable of the phone for activation operation (charging
cables without data transmission function cannot complete activation);
Please check whether controller has sufficient power; if power indicator keeps
flashing quickly or slowly after power switch is turned on, it indicates that
controller does not have sufficient power, therefore it cannot activate button
mapping, please charge controller first before trying button mapping activation
again.
2
What can keyboard-mouse mode do?
Keyboard-mouse mode is an innovative design of Flydigi controllers that allows
you to use controller as keyboard/mouse converter. You can connect keyboard
and mouse with USB interface to Wee 2 controller and connect it with terminals
such as phones and tablets by Bluetooth, and then control phone games by
your keyboard and mouse.
3
How can I use keyboard-mouse mode?
See “Connection instruction for keyboard-mouse mode” for details.
4
Can I use keyboard-mouse mode with controller mode at the
same time?
No.
5
User
Manual
Stretchable Controller + Keyboard/Mouse
Converter 2 in 1
To Next Page
Need help?
General
