Flymaster N Series - Add Waypoints; Nearby Airspaces; Nearby Landings; Current GPS Position

7
Getting started
Add Waypoints (GPS M only) - Use FLYMASTER INSTRUMENT
MANAGER (PC or MAC) to add waypoints to the instrument. You can also
add waypoints manually. Adding Waypoints Manually: Use cursor
buttons to navigate on the Menu. Press ENTER to choose the WAYPOINTS/
ROUTE from the main menu. Press Enter in one of the waypoints or in the
empty list. Use Up and down buttons to Select “Insert New WP”. Use Up and
Down buttons to change the values. Press ENTER to accept. Keep pressing
ENTER to accept all values and exit or press ESC to a Quick exit.
Nearby Airspaces (GPS M only) - Use cursor buttons to navigate
on the Menu. Press ENTER to choose the NEARBY AIRSPACES from the main
menu. Use Up and Down buttons to choose the airspace. In the lower part of
the display the airspace info and status will be visible. Pressing Enter button
in each airspace will give you options to disable it permanently or temporary
using the UP and DOWN buttons. Press ENTER to accept.
Nearby Landings (GPS M only) - Use cursor buttons to navigate
on the Menu. Press ENTER to choose the NEARBY LANDINGS from the main
menu. The list will show the waypoints with “landing -YES” definition, sorted
by distance.
Current GPS position (GPS M only): Use cursor buttons to navi-
gate on the Menu. Press ENTER to choose the GPS from the main menu. The
current position will be displayed.
Time Settings: Use cursor buttons to navigate on the Menu. Press ENTER
to choose the Time from the main menu. This settings will allow to set the vario
integration time and the UTC offset.
Sync to Flymaster Cloud ights- To send your flights and store
them in your Flymaster Cloud Flights account, turn ON the instrument, connect
it via USB to the FLYMASTER INSTRUMENT MANAGER, using the supplied
USB C to USB Type A to the computer and use the “sync to cloud” tool.
Flight Log - Use cursor buttons to navigate on the Menu. Press ENTER to
choose the Flight Log from the main menu. Navigate in the flight log list using
up and down buttons. Select the flight and press enter to get the options for the
flight, like generate IGC, delete the flight or delete all flights.
Generate IGC le to Micro SD card - Use cursor buttons to navi-
gate on the Menu. Press ENTER to choose the Flight Log from the main menu.
Navigate in the flight log list using up and down buttons. Select the flight and
press enter to get the options for the flight, press ENTER on Generate IGC. The
IGC file will be stored in the SD card that can be accessed using the computer
Windows Explorer or Mac OS finder.
ENG