Flymo CCT250 User Manual

CONTOUR
POWER PLUS
CORDLESS
For all customer enquiries or for replacement parts, contact:-

01325 300303
www.flymo.com
customer.services@husqvarna.co.uk
IMPORTANT INFORMATION
Read before use
& retain for future reference
Original Instructions

Flymo CCT250 Specifications

General

Power	250 W
Cutting Width	25 cm
Line Feed	Automatic
Handle Type	Loop handle
Corded/Cordless	Corded
Power Source	Electric
Cable Length	10 m

Summary

Safety

Battery Replacement

Assembly Instructions

Assembly of Switch Handle to Tube

Steps to connect the switch handle assembly to the trimmer tube securely.

Assembly of Trimmer Head to Tube

Steps to connect the trimmer head assembly to the trimmer tube securely.

Safety Guard Assembly

Instructions for correctly fitting the safety guard over the cutting head.

Wheel Assembly

Steady Handle Assembly

Height Adjustment

Fitting the Wall Bracket and Charging the Battery

Initial Charging Procedure

Re-Charging Your Cordless Trimmer

Auto Line Feed System

How to trim and edge

How to trim

Instructions for operating the trimmer to cut grass effectively.

How to edge

Steps for converting the trimmer to an edger and performing edging tasks.

Cutting Head

To replace nylon line

To fit spool and line complete

To fit nylon line only

Maintenance

Fault Finding Chart