EasyManua.ls Logo

Flymo EasiCut 460 - Technical Data; Service; Warranty

Flymo EasiCut 460
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fails to stop when one switch lever is released:
v Immediately disconnect from the mains electricity supply
and consult your local approved Service Centre.
Poor cut quality:
1. Ensure the product is being used correctly (see How to use your hedge
trimmer).
2. Ensure blades are free from trapped debris.
3. Damaged Blades?
Immediately disconnect from the mainselectricity supply and
consult your local approved Service Centre.
Excessive Vibration:
v Immediately disconnect from the mains electricity supply and
consult your local approved Service Centre.
7. TECHNICAL DATA
Electric Hedge Trimmer
Unit Value
EasiCut 460
Value
EasiCut 520
Blade length cm 45 50
Power W 450 500
Sound pressure level L
pA
1)
Uncertainty k
pA
dB(A)
82
3
84
3
Sound power level L
WA
measured / guaranteed
Uncertainty k
pA
dB(A)
93 / 94
1
94 / 96
2
Hand / arm vibration a
vhw
1)
Uncertainty k
vhw
m/s
2
3.0
1.5
<2.5
1.5
Weight kg 3.1 3.27
Measuring process complying with:
1)
EN 60745-2-15
2)
RL 2000/14/EC / S.I. 2001 No.1701
NOTE: The stated vibration emission value has been measured according to
astandardized test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of expo-
sure. The vibration emission value can vary during actual use of the electric power tool.
8. SERVICE / WARRANTY
Service:
Please contact the address on the back page.
Warranty statement:
In the event of a warranty claim, no charge is levied to you for the services
provided.
Husqvarna UK Ltd. grants a warranty for all original FLYMO new products
for two years from the date of original purchase from the retailer, provided
that the devices have been for private use only. This manufacturer’s
warranty does not apply to products acquired second hand. This warranty
includes all significant defects of the product that can be proved to be
material or manufacturing faults. This war ranty is fulfilled by supplying
afully functional replacement product or by repairing the faulty product
sent to us free of charge; we reserve the right to choose between these
options. This service is subject to the following provisions:
The product has been used for its intended purpose as per the recom-
mendations in the operating instructions.
Neither the purchaser nor a third party has attempted to open or repair
the product.
Only Original FLYMO replacement parts and wear parts have been used
for operation.
Presentation of the receipt.
Normal wear and tear of parts and components (such as blades, blade
fixing parts, turbines, light bulbs, V-belts / toothed belts, impellers, air
filters, spark plugs), visual changes, wear parts and consumables are
excluded from the warranty.
This manufacturer’s warranty is limited to replacement and repair of
products in accordance with the abovementioned conditions. The
manufacturer’s warranty does not constitute an entitlement to lodge
other claims against us as a manufacturer, such as for damages.
This manufacturer’s warranty does not, of course, affect statutory and
contractual warranty claims against the dealer / retailer.
The manufacturer’s warranty is governed by the law of the Federal
Republic of Germany.
In case of a warranty claim, please return the faulty product, together
with a copy of the receipt and a description of the fault, with postage
paid to the service address.
Consumables:
The blades and the electric mains cable are consumables and are not
included in the guarantee.
7
31460-85.960.01.indd 731460-85.960.01.indd 7 07.09.21 11:0507.09.21 11:05

Other manuals for Flymo EasiCut 460

Related product manuals