9
MAINTENANCE
Caring for your Trimmer
• WARNING
Disconnect from the mains
electricity supply, before
attempting any maintenance
or adjustment. Cutting head
continues to rotate after the
trimmer has been switched
off.
After you have finished using your
Flymo Trimmer follow the procedure
below:
1. Disconnect from the mains
electricity supply.
2. Never clean your trimmer with
water, cleaning fluids, or
solvents, just remove debris with
a suitable tool, a soft brush or
dry cloth.
3. Using the scraper provided,
clean around the inside of the
cutting head housing to remove
any grass and debris. (Fig L)
4. Using a soft brush, clean around
the inside of the cutting head
housing (Fig M), the cutting
head (Fig N) and the motor
housing air vents.(Fig P)
5. Inspect the trimmer carefully,
especially the parts of the
cutting head.
6. If your trimmer is damaged in
any way contact your local
Flymo/Partner approved service
centre.
• Never use a damaged trimmer.
7. Wind cable carefully to avoid
kinking.
8. Store in a cool, dry place and
out of reach of children.
L
M
N
P
To Next Page
Loading...
Need help?
General