6
USE
D
E
How to trim
• WARNING
The use of eye protection is
recommended. Do not lean
over the trimmer guard whilst
trimming, objects may be
thrown by the cutting line. Do
not allow cutting head to rest
on the ground. Do not
overload your trimmer.
Overloading can be avoided
by making sure the motor
speed does not drop unduly.
Disconnect from the mains
electricity supply before
attempting any maintenance or
adjustment.
1. Cut with cutting line at an angle
using the tip.
2. Swing trimmer in and out of the
cutting area taking small cuts.
To Next Page
Loading...
