Electric Blower / Vacuum Unit Value
(Art. 9672727-01)
Rated Power W 3000
Mains voltage V 230
Mains frequency Hz 50
Vacuum flow l/s 100
Mulch Ration 10:1
Blow speed m/s 95
Weight kg 5.3
Sound pressure level L
pA
1)
Uncertainty k
pA
dB(A)
86
2
Sound power level L
WA
2)
:
measured/guaranteedt
Uncertainty k
WA
dB(A)
103 / 105
2
Hand/arm vibration a
vhw
1)
Uncertainty k
pA
m/s
2
2,5
1
Measuring process complying with:
1)
EN 50636-2-100
2)
RL 2000/14/EC
NOTE: The stated vibration emission value has been measured according to a standardized test
procedure and can be used for comparison of one electric power tool with another. It can also be
used for preliminary evaluation of exposure. The vibration emission value can vary during actual
use of the electric power tool.
7. TECHNICAL DATA
Problem Possible Cause Remedy
Poor blowing / vacuum Air inlets are blocked.
v Clean the air inlets.
Mode indicator is not in the right
position.
v Move the mode indicator to
position 1 or 2.
Tube is blocked.
v Open the blockage clearing cap
and clear the blockage.
Blower / vacuum vibrates
abnormally
Rotor blades are damaged.
v Inspect the rotor blades and replace
them if necessary.
Mechanical failure.
v Contact the Husqvarna UK Ltd.
Customer Service.
NOTE: For any other malfunctions please contact the Husqvarna UK Ltd. Customer Service.
Repairs must only be done by Husqvarna UK Ltd. service departments or specialist dealers
approved by FLYMO.
To Next Page
Loading...
Need help?
General
