R1 R2
R3
R4
Storing your cable in the Easi-Reel cable winder
1. Insert the female connector into the top of the cable
winder (R1)
2. Place the cable under the cable guide (R2)
3. Turn the cable winder (R3) until all of the cable is
wound in.(R4)
Warning:- When cable is fully wound, lid becomes
heavy
Unwinding the cable before re-use
1. Pull the cable by the plug and unwind the cable
fully.
• Ensure that the cable is released from the cable
guide (R2) before using your machine.
Easi-Reel Cable Winder
Caring for your Lawnmower
Cleaning
IMPORTANT: It is very important that you keep your
lawnmower clean. Grass clippings left in any of the
air intakes or under the hood could become a poten-
tial fire hazard. USE GLOVES
It is recommended that you clean your lawnmower
straight after mowing while the grass is still wet.
1. Remove grass from under the hood with the span-
ner/scraper tool. (S)
2. Remove the blade, see Figure L, to gain access
to the fan and clean with a soft brush. (S)
3. Lever the roller out of position and clean with a
soft brush. (S)
4. Remove grass clippings from:
• all air intakes (T)
• grassbox (U)
5. Thoroughly clean the inside of the window with a
soft brush (V).
6. Wipe over the surface of your lawnmower with a
dry cloth.(W)
• IMPORTANT
Never use water for cleaning your lawnmower. Do
not clean with chemicals, including petrol, or sol-
vents - some can destroy critical plastic parts.
S
V W
T
U
To Next Page
Loading...
