EasyManua.ls Logo

FLYSCY FS-GT2E - User Manual

FLYSCY FS-GT2E
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Transmier Operaon
Cauon: Never hold the trigger when turning on transmier. Ensure you understand all features
of transmier before using. Do not drop transmier or damage can occur.
1. Steering Wheel: Controls direcon of model (le/right).
2. Throle Trigger: Controls direcon of model (forward/reverse).
3. Power Switch: Turns transmier on and o.
4. Power LED: Indicates if transmier is on or o.
5. Power Check
6. Steering Trim: Adjusts the centering of the models front res.
7. Steering Dual Rate: Adjusts the amount the models front res turn front right to le.
8. Throle Trim: Adjusts the motors speed when trigger is at neutral posion.
9. Steering Reverse: Switch that will reverse the direcon of steering servo.
10. Throle Reverse: Switch that will reverse the direcon of the motor when trigger is moved.
11. Bind Buon: Used to bind transmier to receiver.
12. Baery Door: Remove door to install 4x AA baeries.
Transmier Features
1
2
3
4
5
6
7
8
9
10
11
12
Safety Precauons and Warnings
This radio is not a toy and should not be operated by anybody under 14 years of age. Adult
supervision is required.
Always ensure radio is on before turning on car or injury or damage can occur.
Always perform system check to ensure throle and steering is working correct before
operang.
Do not mix old and new baeries. It is recommended to use only alkaline baeries.
Do not operate radio in rain or wet environment.
Ensure Failsafe funcon is set before operang vehicle.
Do no hold transmier by antenna while operang, this will decrease performance.
Question and Answer IconNeed help?

Do you have a question about the FLYSCY FS-GT2E and is the answer not in the manual?

Summary

Safety Precautions and Warnings

Transmitter Operation and Features

Transmitter Controls

Details on steering wheel, throttle trigger, trims, reverse functions, and dual rate adjustments.

Power and Indicators

Information on the power switch, LED indicator, and battery compartment.

Binding Functionality

Description of the bind button for connecting to the receiver.

Binding Transmitter to Model

Failsafe Setting Procedure

How to Set Failsafe

Steps to configure the failsafe function for transmitter signal loss.

Test the Failsafe

Procedure to verify the correct operation of the failsafe.

FLYSCY FS-GT2E Specifications

General IconGeneral
Channels2
Frequency2.4GHz
RF Power<20dBm
Low Voltage WarningYes
ChargingNo
ANT Length26mm
i-BUS InterfaceNo
Data Acquisition InterfaceNo
Model TypeCar/Boat
DSC PortYes
Size156 x 223 x 94mm