Servos may not arrive in the box turning in the direction you need. For example, all the
electronics are installed and when the right stick is pushed right, the rudder turns left. The
servo direction can easily be reversed using these directions from the Flysky manual.
Binding
The transmitter is “bound” to the receiver electronically. This prevents the signals from one
radio to interfere with the signals from a different radio. The transmitter and receiver in the
box may arrive already bound from the seller. If not, it is an easy procedure.
*
**
* The Bind Cable (or binding plug) is the small plastic loop included with the receiver. It is
just a jumper wire.
**Check to be sure the transmitter is OFF before connecting the lead from the battery to
provide the power.
Data Acquisition Interface:
To Previous Page
Loading...
