To Next PageTo Next Page
Need help?Do you have a question about the FlySky FS-i6X and is the answer not in the manual?
General| Frequency Range | 2.4055-2.475GHz |
|---|---|
| Modulation | GFSK |
| Transmitter Power | < 20dBm |
| Display | LCD |
| Model Memory | 20 |
| RF Channel | 135 |
| Bandwidth | 500KHz |
| 2.4GHz System | AFHDS 2A |
| Stick Resolution | 1024 |
| Low Voltage Warning | <4.2V |
| Chargeable | No |
| Antenna Length | 26mm |
| Weight | 392g |
| Size | 174x89x190mm |
| On-line Update | Yes |
| Power Supply | 4xAA batteries or 2S LiPo |
| Model Type | Fixed-wing, Helicopter |
| DSC Port | PS2; output: PPM |
| Compatibility | AFHDS 2A Receivers |
| Channels | 6-10 (Default 6) |
Lists all components included in the X220 v2 RTF package for user reference.
Details the functions of various buttons and switches located on the remote control transmitter.
Instructions for powering on/off the remote control and installing the necessary batteries.
Explains the primary functions of the left and right joysticks for controlling drone movement.
Explains the meaning of the readings displayed on the remote control transmitter's screen.
Provides essential safety guidelines for drone operation, including legal compliance and safe distances.
Explains how to arm/disarm the drone and the two available flight modes: Level and Acro.
Step-by-step guide on connecting the battery and powering on the drone for flight.
Instructions on safely removing and replacing drone propellers using the correct tools.
Detailed steps for successfully binding the remote transmitter to the drone's receiver.
Checklist for ensuring all components are secure, connected, and charged before initiating flight.
Guidance on performing the initial flight, including hovering and controlling the drone's movement.
Crucial safety advice regarding collisions, skill development, battery life, and environmental hazards.
Explains the expected voltage range for the drone battery cells and the full charge voltage.
Step-by-step instructions and indicator light meanings for charging the drone battery.
Guidelines for storing the battery properly when not in use to maintain its health and longevity.
Critical safety advice for handling, charging, and disposing of drone batteries to prevent damage or fire.
Provides a wiring diagram for the flight controller, intended for experienced users with soldering skills.
Shows a wiring diagram for the drone's components, noting it is for demonstration purposes.
Explains how to use the video transmitter for FPV flight and describes its key components.
Details how to adjust the video transmitter's power output and channel selection using its buttons.
Provides detailed technical specifications for the drone's Frame Kit and Motor components.
Technical specifications for the PDB-XT60 and F405 Flight Controller.
Technical specifications for the 30A ESC and FOXEER Arrow Micro PRO Camera.
Technical specifications for the TC5804 PRO VTX, including power and frequency settings.
Technical specifications for the Racerstar propellers and the 1500mAh 4S battery.
Technical specifications for the Flysky i6X remote controller and FS-A8S receiver.
Lists certificates and compatible transmitter models for the FS-A8S receiver.
