34
14.3. Depower-line adjustment
Adjustments to the depower-line can be made to suit your preferred arm length
position on the bar. Simply adjust the rope at the bottom of the trim strap to the
desired length. It is important that you adjust the knot at the end of the depower-line
to compensate for the shorter or longer length of the line between the trim strap and
the bar. If you shorten the rope you must move the knot at the end of the depower-
line up, and down if you lengthen it.
The BAR-SETUP of our other kites can be found on our homepage
www.flysurfer.de – support / bar setup.
To Next Page
Loading...
