Connecting the battery
VEHICLE SETUP
Step 1: Separate the car shell, the two buckles in the front of the car shell are opened outward, and
the two buckles at the rear of the car shell are opened inward.
Step 2: Place the battery in the battery compartment on the frame and fix it with the attached rubber
band.
Step 3: Connect the battery plug.
14
EN
NOTE
1.If it is not in use for a long time, unplug
and take off the battery to prevent battery
leakage.
2.Do not open, disassemble, or attempt to
repair the battery.
3. The battery needs to be disconnected
from vehicle before it can be charged
4. Do not charge battery in vehicle.
3
1 2
To Next Page
Loading...
